Lenovo NetVista Hardware Maintenence Manual for Netvista 6838 and 6848 systems - Page 68
X-XXX 030-01X-XXX
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Diagnostic Error Code FRU/Action 025-198-XXX IDE interface test aborted 1. If a component is called out, make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 025-199-XXX IDE interface test failed, cause unknown 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 030-000-XXX SCSI interface Test Passed 1. No action 030-00X-XXX 030-01X-XXX SCSI interface failure 1. SCSI signal cable 2. Check power supply 3. SCSI device 4. SCSI adapter card, if installed 5. System board 030-027-XXX SCSI interface Configuration/Setup error 1. SCSI signal cable 2. Flash the system 3. SCSI device 4. SCSI adapter card, if installed 5. System board 030-03X-XXX 030-04X-XXX SCSI interface error 1. SCSI signal cable 2. Check power supply 3. SCSI device 4. SCSI adapter card, if installed 5. installed System board 030-195-XXX SCSI interface Test aborted by 1. Information user 2. Re-start the test, if necessary 030-196-XXX SCSI interface test halt, error threshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file 030-197-XXX SCSI interface test warning 1. Make sure the component that is called out is connected and/or enabled 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 030-198-XXX SCSI interface test aborted 1. If a component is called out, make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 030-199-XXX SCSI interface test failed, cause unknown 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 60 IBM NetVista Type 6838, 6848: Hardware Maintenance Manual