Lenovo NetVista Hardware Maintenence Manual for Netvista 6838 and 6848 systems - Page 66
Make sure the component that is called, out is connected and/or enabled
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Diagnostic Error Code 015-199-XXX USB port test failed, cause unknown 018-000-XXX PCI Card Test Passed 018-0XX-XXX PCI Card Failure 018-195-XXX PCI Card Test aborted by user 018-196-XXX PCI Card test halt, error threshold exceeded 018-197-XXX PCI Card test warning 018-198-XXX PCI Card test aborted 018-199-XXX PCI Card test failed, cause unknown 018-250-XXX PCI Card Services error 020-000-XXX PCI Interface Test Passed 020-0XX-XXX PCI Interface error 020-195-XXX PCI Test aborted by user 020-196-XXX PCI test halt, error threshold exceeded FRU/Action 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 1. No action 1. Riser card, if installed 2. System board 1. PCI card 2. Information 3. Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 1. Make sure the component that is called out is connected and/or enabled 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 1. Make sure the component that is called out is connected and/or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 1. PCI card 2. Riser card, if installed 3. System board 1. No action 1. PCI card 2. Riser card, if installed 3. System board 1. Information 2. Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 58 IBM NetVista Type 6838, 6848: Hardware Maintenance Manual