Lexmark X464de Service Manual - Page 111

7014-xxx To change the value of this setting: 1. Touch Panel Menus from the Configuration Menu. [setting's current value] screen. 2. Touch or to scroll through the setting's other possible values. 3. Touch Back to cancel and return to the Configuration Menu. 4. Touch Submit to save the change. appears on the touch- PPDS Emulation The value of the PPDS Emulation menu item determines if a device can recognize and use the PPDS datastream. The current value of this setting appears in parentheses to the right of the setting on the Configuration Menu screen. The following table indicates how the value of this setting affects the user default value for the SmartSwitch and Printer Language settings: Value of PPDS Emulation setting Activate Deactivate Resulting value of SmartSwitch setting Resulting value for Printer Language settings (all ports) Off PPDS Emulation Note: You can still switch languages on the operator panel or through the PJL ENTER LANGUAGE command. On Printer's factory default value To change the value of this setting: 1. Touch PPDS Emulation from the Configuration Menu. [setting's current value] touch-screen. 2. Touch or to scroll through the setting's possible values. 3. Touch Back to cancel and return to the Configuration Menu. 4. Touch Submit to save the change. appears on the Download Emuls This setting enables you to disable a Downloadable emulator (DLE) that is installed on the MFP. The setting for this menu settng is disabled. Note: The DLE is re-enabled automatically after two PORs. To change the value of this setting: 1. Touch Download Emuls from the Configuration Menu. [setting's current value] touch-screen. 2. Touch or to scroll through the setting's possible values. 3. Touch Back to cancel and return to the Configuration Menu. 4. Touch Submit to save the change. appears on the Diagnostic aids 3-5