Lexmark X464de Service Manual - Page 66

7014-xxx Error Description Action 849.01 HD/Config ID Mismatch Engine software service errors 900.xx RIP software error 902.xx Engine software error 903.xx Paperport link driver error 904.xx Interface violation by RIP 905.xx Interface violation by paperport device 906.xx RIP interface drive error DC pick motor errors 910.xx DC pick motor stall 911.xx DC pick motor excessive PWM 912.xx DC pick motor below speed 913.xx DC pick motor over speed 914.00 DC pick motor error 914.01 Lost encoder feedback Transfer service errors 917.xx Transfer service error Fuser service errors 920.00 Under temperature during steady state control. 921.00 Under temperature during standby control. 922.00 Fuser failed to ramp to target temperature 923.00 Fuser is over temperature. 924.00 Open thermistor check. 925.xx Wrong fuser installed. The fuser type stored in the cartridge ID does not match the actual fuser installed in the printer. Fan service errors 927.00 Service fan error Toner service errors A device has a hard drive installed, but its Configuration ID indicates that a hard drive shouldn't be present. Turn off MFP for 10 seconds and restart. If error re-occurs, replace controller board. Replace the controller board. See Go to "Controller board removal" on page 4-8 Replace the transfer roll. See "Transfer roll service check" on page 2-54. Replace the fuser. See "Fuser service check" on page 2-39. Replace the fan. See "Cooling fan service check" on page 2-37. 2-28 Service Manual