Lexmark X464de Service Manual - Page 135

7014-xxx 3. Once the test is complete, the power indicator turns on solid, and either the message Disk Test/Clean Test Passed or Disk Test/Clean Failed appears. If the message indicates failure, the disk is unusable. PRINTER SETUP PRINTER SETUP Defaults Printed Page Count Permanent Page Count Serial Number Engine Setting 1 Engine Setting 2 US 127 127 xxxxxxx 0 0 Submit Back The triangles pointing up or down indicate whether there are additional menus. Touch the up or down arrows to display these additional menus. Note: If you make changes, touch Submit to make the change effective. Defaults US/Non-US defaults changes whether the printer uses the US factory defaults or the non-US factory defaults. The settings affected include paper size, envelope size, PCL symbol set, code pages, and units of measure. Warning: Changing this setting resets the printer to factory defaults, and data may be lost. It cannot be undone. Printed Page Count The page count can only be viewed and cannot be changed. Touch Back to return to Diagnostics Menu. Permanent Page Count The permanent page count can only be viewed and cannot be changed. Touch Back to return to Diagnostics Menu. Serial Number The serial number can only be viewed and cannot be changed. Touch Back to return to Diagnostics Menu. Engine Settings 1 through 4 Do not change these settings unless requested to do so by your next level of support. Model Name Diagnostic aids 3-29