Netgear WG103 WG103 Reference Manual - Page 38
Wired Equivalent Privacy WEP data encryption provides data security. WEP Shared
UPC - 606449062038
View all Netgear WG103 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
WG103 ProSafe 802.11g Wireless Access Point Reference Manual Figure 3-1 There are several ways you can enhance the security of your wireless network: • Use Multiple BSSIDs combined with VLANs. You can configure combinations of VLANS and BSSIDs with stronger or less restrictive access security according to your requirements. For example, visitors could be given wireless Internet access but be excluded from any access to your internal network. For information about how to configure BSSIDs, see "Creating and Editing Security Profiles" on page 3-5. • Restrict Access based by MAC address. You can allow only trusted PCs to connect so that unknown PCs cannot wirelessly connect to the wireless access point. Restricting access by MAC address adds an obstacle against unwanted access to your network, but the data broadcast over the wireless link is fully exposed. For information about how to restrict access by MAC address, see "Restricting Wireless Access by MAC Address" on page 3-14. • Turn off the broadcast of the wireless network name (SSID). If you disable broadcast of the SSID, only devices that have the correct SSID can connect. This nullifies the wireless network discovery feature of some products, such as Windows XP, but the data is still exposed. For information about how to turn of broadcast of the SSID, see "Creating and Editing Security Profiles" on page 3-5. • WEP. Wired Equivalent Privacy (WEP) data encryption provides data security. WEP Shared Key authentication and WEP data encryption block all but the most determined eavesdropper. This data encryption mode has been superseded by WPA-PSK and WPA2-PSK. For information about how to configure WEP, see "Configuring WEP" on page 3-10. 3-2 Wireless Security v1.0, February 2009