Netgear WG103 WG103 Reference Manual - Page 75
Q VLAN Settings, Enable, Redirect URL, Apply, admin, password, Configuration, System, Advanced
UPC - 606449062038
View all Netgear WG103 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
WG103 ProSafe 802.11g Wireless Access Point Reference Manual Figure 5-2 3. Enter the following settings: • HTTP Redirect,. Select the Enable radio button to redirect a HTTP request. • Redirect URL. Enter the URL to which the HTTP request must be redirected. 4. Click Apply to save your settings. The Hotspot feature is now enabled and the first HTTP request will be redirected to the supplied URL. 802.1Q VLAN Settings The 802.1Q VLAN protocol on the wireless access point logically separates traffic on the same physical network. To configure VLAN settings: 1. Log in to the wireless access point at its default LAN address of http://192.168.0.229 with its default user name of admin and default password of password, or using whatever password and LAN address you have chosen for the wireless access point. 2. Select Configuration > System > Advanced > General. T802.1Q VLAN settings screen displays (see Figure 5-3 on page 5-4). Advanced Configuration 5-3 v1.0, February 2009