Netgear WG103 WG103 Reference Manual - Page 71
Enabling Rogue AP Detection, admin, password, Configuration, Security, Advanced, Rogue AP
UPC - 606449062038
View all Netgear WG103 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
WG103 ProSafe 802.11g Wireless Access Point Reference Manual Enabling Rogue AP Detection The wireless access point can detect unknown (rogue) APs and wireless stations and can prevent them from connecting to the wireless access point. To enable rogue AP detection: 1. Log in to the wireless access point at its default LAN address of http://192.168.0.229 with its default user name of admin and default password of password, or using whatever password and LAN address you have chosen for the wireless access point. 2. Select Configuration > Security > Advanced > Rogue AP. The Rogue AP screen displays: Figure 4-16 3. Select the Turn Rogue AP Detection On check box to enable rogue AP detection. 4. Click Apply to activate rogue AP detection. The wireless access point continuously scans the wireless network and collects information about all APs detected on its channel. There are several other actions you can initiate from the Rogue AP screen. These actions are described in Table 4-3 on page 4-20. Managing Your Network v1.0, February 2009 4-19