Netgear WNDAP360 WNDAP360 Reference Manual - Page 19
Con Basic General System Settings and Time Settings, To con basic system settings - default
View all Netgear WNDAP360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
ProSafe Dual Band Wireless-N Access Point WNDAP360 Configure Basic General System Settings and Time Settings Note: After you have successfully logged in to the wireless access point, the basic General system settings screen displays. To configure basic system settings: 1. Select Configuration > System > Basic > General. The basic General system settings screen displays: Figure 8. 2. Specify the fields as explained in the following table: Table 2. Basic General System Settings Field Description Access Point Name This unique name is the wireless access point NetBIOS name. The name is printed on the rear label of the wireless access point. The default is netgearxxxxxx, where xxxxxxx represents the last 6 digits of the wireless access point MAC address. You can replace the default name with a unique name up to 15 characters long. The access point name can be retrieved through SNMP. Country/Region From the Country/Region drop-down list, select the country where the wireless access point is installed. Note: It might not be legal to operate this wireless access point in a region other than one of those identified in this field. 3. Click Apply to save your settings. Installation and Basic Configuration 19