Netgear WNDAP360 WNDAP360 Reference Manual - Page 37
Con and Enable Security Profiles, Restrict Wireless Access by MAC Address
View all Netgear WNDAP360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
ProSafe Dual Band Wireless-N Access Point WNDAP360 Unlike wired network data, your wireless data transmissions can extend beyond your walls and can be received by anyone with a compatible adapter. For this reason, use the security features of your wireless equipment. The wireless access point provides highly effective security features that are covered in detail in this chapter. Deploy the security features appropriate to your needs. Figure 14. There are several ways you can enhance the security of your wireless network: • Use multiple BSSIDs combined with VLANs. You can configure combinations of VLANS and BSSIDs (security profiles) with stronger or less restrictive access security according to your requirements. For example, visitors could be given wireless Internet access but be excluded from any access to your internal network. For information about how to configure BSSIDs, see Configure and Enable Security Profiles on page 42. • Restrict access based by MAC address. You can allow only trusted PCs to connect so that unknown PCs cannot wirelessly connect to the wireless access point. Restricting access by MAC address adds an obstacle against unwanted access to your network, but the data broadcast over the wireless link is fully exposed. For information about how to restrict access by MAC address, see Restrict Wireless Access by MAC Address on page 53. • Turn off the broadcast of the wireless network name (SSID). If you disable broadcast of the SSID, only devices that have the correct SSID can connect. This nullifies the wireless network discovery feature of some products, such as Windows XP, but the data is still exposed. For information about how to turn of broadcast of the SSID, see Configure and Enable Security Profiles on page 42. • WEP. Wired Equivalent Privacy (WEP) data encryption provides data security. WEP shared key authentication and WEP data encryption block all but the most determined eavesdropper. This data encryption mode has been superseded by WPA-PSK and WPA2-PSK. For information about how to configure WEP, see Configure and Enable Security Profiles on page 42 and Configure an Open System with WEP or Shared Key with WEP on page 47. • Legacy 802.1X. Legacy 80.1X uses RADIUS-based 802.1x authentication but no data encryption. Wireless Configuration and Security 37