Netgear WNDAP360 WNDAP360 Reference Manual - Page 41
Form for 802.11a/an modes, Wireless Configuration and Security
View all Netgear WNDAP360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
ProSafe Dual Band Wireless-N Access Point WNDAP360 Form for 802.11a/an modes Store this information in a safe place: • SSID: The service set identification (SSID) identifies the wireless local area network. You can customize it by using up to 32 alphanumeric characters. Write your SSID on the line. SSID The SSID in the wireless access point is the SSID you configure on the wireless adapter card. All wireless nodes in the same network need to be configured with the same SSID. • WEP Key Size, Key Format Passphrase, and Authentication Choose the key size by circling one: 64, 128, or 152 bits. Choose the key format by circling one: ASCII or HEX. Choose the authentication type by circling one: Open or Shared. Passphrase Note: If you select shared key, the other devices in the network will not connect unless they are set to shared key and have the same keys in the same positions as those in the wireless access point. • WPA-PSK (Pre-Shared Key) and WPA2-PSK Record the WPA-PSK passphrase: WPA-PSK Passphrase Record the WPA2-PSK passphrase: WPA2-PSK Passphrase • WPA RADIUS Settings For WPA, record the following settings for the primary and secondary RADIUS servers: Server Name/IP Address: Primary Secondary Port: Shared Secret • WPA2 RADIUS Settings For WPA2, record the following settings for the primary and secondary RADIUS servers: Server Name/IP Address: Primary Secondary Port: Shared Secret Wireless Configuration and Security 41