Netgear WNDAP360 WNDAP360 Reference Manual - Page 99
Configuration > Wireless Bridge, Wireless Point-to-Multi-Point Bridge
View all Netgear WNDAP360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
ProSafe Dual Band Wireless-N Access Point WNDAP360 To configure the wireless access point to repeat the wireless signal: 1. Select the 802.11b/bg/ng or 802.11a/na tab. 2. Configure the security profiles on the wireless access point (AP2 in the previous figure): a. Select Configuration > Wireless Bridge. The Bridging screen displays (see the following figure). b. Select the Enable Wireless Bridging check box. The Local MAC Address field is a nonconfigurable field that shows the MAC address of the wireless access point. c. Select the Wireless Point-to-Multi-Point Bridge radio button. The screen adjusts. Figure 60. d. The profile table shows four security profiles. Choose a security profile to edit by selecting the corresponding radio button to the left of the profile. e. Click Edit to configure the selected security profile settings. The Edit Security Profile screen displays for the selected security profile. (The following figure contains some examples.) Advanced Configuration 99