Netgear WNDAP360 WNDAP360 Reference Manual - Page 59

SNMP Management, To set up an SNMP management interface, Maintenance > Remote Management > SNMP

Get Netgear WNDAP360 PDF manuals and user guides View all Netgear WNDAP360 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

ProSafe Dual Band Wireless-N Access Point WNDAP360 SNMP Management  To set up an SNMP management interface: 1. Select Maintenance > Remote Management > SNMP. The SNMP screen displays: Figure 31. 2. Specify the settings as explained in the following table: Table 16. SNMP Settings Field Description SNMP Select the Enable radio button to allow the SNMP network management software, such as HP OpenView, to manage the wireless access point through SNMPv1/v2 protocol. By default, the Disable radio button is selected. Read-Only Community Name Enter the community string to allow the SNMP manager to read the wireless access point's Management Information Base (MIB) objects. The default is public. Read-Write Community Name Enter the community string to allow the SNMP manager to read and write the wireless access point's MIB objects. The default is private. Trap Community Name The community string to allow the SNMP manager to send traps. The default is trap. IP Address to Receive Traps The IP address of the SNMP manager to receive traps sent from the wireless access point. Trap Port The port number of the SNMP manager to receive traps sent from the wireless access point. The default is 162. 3. Click Apply to save your settings. Management 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
Management
59
ProSafe Dual Band Wireless-N Access Point WNDAP360
SNMP Management
To set up an SNMP management interface:
1.
Select
Maintenance > Remote Management > SNMP
. The SNMP screen displays:
Figure 31.
2.
Specify the settings as explained in the following table:
3.
Click
Apply
to save your settings.
Table 16.
SNMP Settings
Field
Description
SNMP
Select the
Enable
radio button to allow the SNMP network management
software, such as HP OpenView, to manage the wireless access point
through SNMPv1/v2 protocol. By default, the Disable radio button is
selected.
Read-Only Community Name
Enter the community string to allow the SNMP manager to read the
wireless access point’s Management Information Base (MIB) objects. The
default is public.
Read-Write Community Name
Enter the community string to allow the SNMP manager to read and write
the wireless access point’s MIB objects. The default is private.
Trap Community Name
The community string to allow the SNMP manager to send traps. The
default is trap.
IP Address to Receive Traps
The IP address of the SNMP manager to receive traps sent from the
wireless access point.
Trap Port
The port number of the SNMP manager to receive traps sent from the
wireless access point. The default is 162.