Netgear WNDAP360 WNDAP360 Reference Manual - Page 69
Enable the Syslog Server, Monitor the Wireless Access Point
View all Netgear WNDAP360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
ProSafe Dual Band Wireless-N Access Point WNDAP360 Enable the Syslog Server The Syslog screen allows you to enable the syslog option if you have a syslog server on your LAN. If syslog is enabled, the wireless access point sends its syslog files to the syslog server. To enable a syslog server: 1. Select Configuration > System > Advanced > Syslog. The Syslog screen displays: Figure 41. Specify the settings as explained in the following table: Table 17. Syslog Settings Field Description Enable Syslog Select the check box to enable the syslog option. By default, the syslog option is disabled. Syslog Server IP Address Enter the IP address of the syslog server to which the wireless access point sends the syslog files. Port Number Enter the port number that is configured on the syslog server. The default port number is 514. 2. . Click Apply to save your settings. Monitor the Wireless Access Point The wireless access point provides a variety of status and usage information that is discussed in the following sections: • View System Information • Monitor Wireless Stations • View the Activity Log • Traffic Statistics Management 69