Home » Pioneer Manuals » Audio Components » Pioneer SC-35 » Manual Viewer

Pioneer SC-35 Owner's Manual - Page 124

Other audio problems, SMALL, LARGE, DIGITAL, Home Menu

UPC - 884938108751

Add to My Manuals
Save this manual to your list of manuals

Page 124 highlights

13 Additional information Symptom Remedy No sound from subwoofer. • Check that the subwoofer is connected properly, switched on and the volume turned up. • If your subwoofer has a sleep function, make sure it is switched off. • Make sure that the Subwoofer setting is YES or PLUS (see Speaker Setting on page 115). • The crossover frequency may be set too low; try setting it higher to match the characteristics of your other speakers (see Speaker Setting on page 115). • If there is very little low frequency information in the source material, change your speaker settings to Front: SMALL / Subwoofer: YES, or Front: LARGE / Subwoofer: PLUS (see Speaker Setting on page 115). • Check that the LFE channel is not set to OFF, or to a very quiet setting (see Setting the Audio options on page 76). • Check the speaker level settings (see Channel Level on page 116). Sound is produced from analog components, but not from digital ones (DVD, LD, CD-ROM, etc.). • Check that the input signal type is set to DIGITAL (see Choosing the input signal on page 62). • Make sure that the digital input is assigned correctly for the input jack the component is connected to (see The Input Setup menu on page 45). • Check the digital output settings on the source component. • If the source component has a digital volume control, make sure this is not turned down. • Make sure that the multichannel analog inputs are not selected. Select any other input function. No sound is output or a noise is • Check that your DVD player is compatible with Dolby Digital/DTS discs. output when Dolby Digital/DTS • Check the digital output settings of your DVD player. Make sure that the DTS signal output is set software is played back. to On. • If the source component has a digital volume control, make sure this is not turned down. No sound when using the Home Menu. • If the HDMI input function is selected, sound is muted until exiting the Home Menu. Other audio problems Symptom Remedy Broadcast stations cannot be selected automatically, or there is considerable noise in radio broadcasts. For FM broadcasts • Fully extend the FM wire antenna, adjust the position for best reception and secure to a wall, etc. • Use an outdoor antenna for better reception (see page 37). For AM broadcasts • Adjust the position and direction of the AM antenna. • Use an outdoor antenna for better reception (see page 37). • Noise may be caused by interference from other equipment, such as a fluorescent light, motor, etc. Switch off or move the other equipment, or move the AM antenna. Speaker switching sound (clicking sound) is heard from receiver during playback. • Depending on the listening mode, the front height (or front wide) and surround back speakers may switch automatically in function of changes in the input audio. A speaker switching sound (clicking sound) will be heard from the receiver at this time. If this sound bothers you, we recommend changing the listening mode (see Listening in surround sound on page 59). Noise is output when scanning • This is not a malfunction of the receiver. The scan function of your player alters the digital a DTS CD. information, making it unreadable, resulting in noise being output. Lower the volume when scanning. When playing a DTS format LD • Make sure that the input signal type is set to DIGITAL (see Choosing the input signal on page 62). there is audible noise on the soundtrack. Can't record audio. • You can only make a digital recording from a digital source, and an analog recording from an analog source. • For digital sources, make sure that what you're recording isn't copy protected. • Check that the OUT jacks are properly connected to the recorders input jacks (see Connecting the multichannel analog inputs on page 34). Subwoofer output is very low. • To route more signal to the subwoofer, set it to PLUS or set the front speakers to SMALL (see Speaker Setting on page 115). Everything seems to be set up • The speakers may be out of phase. Check that the positive/negative speaker terminals on the correctly, but the playback receiver are matched with the corresponding terminals on the speakers (see Connecting the sound is odd. speakers on page 24). 124 En

Section	Page
Contents	5
Before you start	9
Our philosophy	9
Features	9
Checking what’s in the box	10
Installing the receiver	10
Loading the batteries	10
Operating range of remote control unit	11
Flow for operating the receiver with RF two-way communications (SC-37 only)	11
Controls and displays	12
Remote control (In case of SC-37)	12
Remote control display	13
RF adapter	14
Remote control (In case of SC-35)	15
Display	16
Front panel	18
Connecting your equipment	20
Rear panel	20
Connecting the RF adapter (SC-37 only)	21
Determining the speakers’ application	22
Other speaker connections	23
Placing the speakers	23
THX speaker system setup	23
Some tips for improving sound quality	23
Connecting the speakers	24
Installing your speaker system	25
Standard surround connection	25
Bi-amping your speakers	26
Bi-wiring your speakers	26
Selecting the Speaker system	27
Front height setup	27
Front wide setup	27
Speaker B setup	27
Bi-Amping setup	27
ZONE 2 setup	27
About the audio connection	27
About the video converter	27
About HDMI	28
Connecting your TV and playback components	29
Connecting using HDMI	29
Connecting your DVD player with no HDMI output	30
Connecting your TV with no HDMI input	31
Connecting an HDD/DVD recorder, BD recorder and other video sources	32
Connecting a satellite/cable receiver or other set-top box	33
Connecting the multichannel analog inputs	34
Connecting other audio components	35
About the WMA9 Pro decoder	35
Connecting additional amplifiers	36
Connecting AM/FM antennas	36
Connecting external antennas	37
MULTI-ZONE setup	37
Making MULTI-ZONE connections	37
Connecting to the network through LAN interface	38
Connecting Optional Bluetooth® ADAPTER	39
Connecting an HDMI-equipped component to the front panel input	39
Connecting an XM Radio tuner	39
Connecting a SiriusConnect™ tuner	39
Connecting an iPod	40
Connecting a USB device	40
Connecting a USB device for Advanced MCACC output	40
Connecting an IR receiver	41
Operating other Pioneer components with this unit’s sensor	41
Switching components on and off using the 12 volt trigger	42
Plugging in the receiver	42
Basic Setup	43
Changing the OSD display language (OSD Language)	43
Automatically conducting optimum sound tuning (Full Auto MCACC)	43
Problems when using the Auto MCACC Setup	45
The Input Setup menu	45
Input function default and possible settings	46
Basic playback	47
Playing a source	47
Playing a source with HDMI connection	47
Selecting the multichannel analog inputs	47
Playing an iPod	48
Playing back audio files stored on an iPod	48
Playing a USB device	49
Playing back audio files stored on a USB memory device	49
Playing back photo files stored on a USB memory device	50
About playable file formats	51
Listening to the radio	52
Improving FM sound	52
Using the noise cut mode	52
Using Neural Surround	52
Tuning directly to a station	52
Saving station presets	52
Listening to station presets	52
Naming station presets	53
Listening to Satellite Radio	53
Listening to XM Radio	53
Using XM HD Surround	54
Saving channel presets	54
Using the XM Menu	54
Listening to SIRIUS Radio	54
Saving channel presets	55
Using the SIRIUS Menu	55
Listening to Internet radio stations (SC-35 only)	56
Programming the Internet radio stations	56
Bluetooth ADAPTER for Wireless Enjoyment of Music	57
Wireless music play	57
Pairing the Bluetooth ADAPTER and Bluetooth wireless technology device	58
Listening to music contents of a Bluetooth wireless technology device with your system	58
Listening to your system	59
Auto playback	59
Listening in surround sound	59
Standard surround sound	59
Using the Home THX modes	60
Using the Advanced surround effects	61
Listening in stereo	61
Using Front Stage Surround Advance	61
Using Stream Direct	62
Selecting MCACC presets	62
Choosing the input signal	62
Better sound using Phase Control	62
Better sound using Phase Control and Full Band Phase Control (SC-37 only)	63
Playback with HOME MEDIA GALLERY inputs (SC-37 only)	64
Enjoying the Home Media Gallery	64
Features of Home Media Gallery	64
Introduction	64
Authorizing this receiver	64
Playback with Home Media Gallery	65
Playing back audio files stored on components on the network	65
Listening to Internet radio stations	66
Listening to Rhapsody	66
Listening to Sirius Internet Radio	67
Listening to Neural Music Direct	67
Playing back your favorite songs	67
Advanced operations for Internet radio	67
Saving Internet radio stations	67
Retrieving saved Internet radio stations	67
Checking about the Accounts	68
About network playback	68
Windows Media Player	68
Windows Media DRM	68
DLNA	68
Content playable over a network	68
About playback behavior over a network	69
Software update	69
About playable file formats	70
Glossary	71
Control with HDMI function	72
Making Control with HDMI connections	72
HDMI Setup	73
Before using synchronization	73
About synchronized operations	74
About connections with a product of a different brand that supports the Control with HDMI function	74
Setting the PQLS function	75
Cautions on the Control with HDMI function	75
Using other functions	76
Setting the Audio options	76
Setting the Video options	78
Switching the speaker terminals	79
Using the MULTI-ZONE controls	79
Making an audio or a video recording	80
Reducing the level of an analog signal	80
Using the sleep timer	81
Dimming the display	81
Switching the HDMI output	81
Using the Web Control function	81
Checking your system settings	81
Resetting the system	82
Default system settings	82
Controlling the rest of your system (In case of SC-37)	83
About the Remote Setup menu	83
Operating multiple receivers	84
Setting the remote to control other components	84
Selecting preset codes directly	84
Programming signals from other remote controls	85
Erasing one of the remote control button settings	85
Resetting the input assignment of one of the input function buttons	86
Resetting the remote control settings	86
Confirming preset codes	86
Renaming input function names manually	86
Direct function	86
Multi Operation and System Off	87
Programming a multi-operation or a shutdown sequence	87
Using multi operations	88
Using System off	88
Controlling components	88
Using the RF communications function	91
Pairing the RF adapter and remote control	92
Operating this receiver by RF communications	92
Operating other components by RF communications	92
Renaming input function names in synchrony with the receiver	93
Setting the remote control operation mode	94
Precautions when using the Omni- Directional RF Remote Control	94
Precautions regarding wavelength	94
Usable range	95
Signal reflection	95
For safe use	95
Controlling the rest of your system (In case of SC-35)	96
About the Remote Setup menu	96
Operating multiple receivers	96
Setting the remote to control other components	97
Selecting preset codes directly	97
Programming signals from other remote controls	97
Erasing one of the remote control button settings	98
Erasing all learnt settings that are in one input function	98
Direct function	98
Setting the backlight mode	99
Multi operation and System off	99
Programming a Multi operation or a shutdown sequence	100
Using multi operations	100
Using System off	100
Erasing the settings for the multi-operation	100
Resetting the remote control settings	101
Default preset codes	101
Controlling components	101
The Advanced MCACC menu	104
Making receiver settings from the Advanced MCACC menu	104
Automatic MCACC (Expert)	104
Manual MCACC setup	106
Fine Channel Level	107
Fine Speaker Distance	107
Standing Wave	107
Acoustic Calibration EQ Adjust	108
Acoustic Calibration EQ Professional	108
Precision Distance (SC-37 only)	110
Checking MCACC Data	110
Speaker Setting	111
Channel Level	111
Speaker Distance	111
Standing Wave	111
Acoustic Cal EQ	111
Group Delay (SC-37 only)	111
Output MCACC data	112
Data Management	112
Renaming MCACC presets	112
Copying MCACC preset data	113
Clearing MCACC presets	113
The System Setup and Other Setup menus	114
Making receiver settings from the System Setup menu	114
Manual speaker setup	114
Speaker system setting	115
Speaker Setting	115
Channel Level	116
Speaker Distance	116
X-Curve	117
THX Audio Setting	117
Network Setup menu	117
IP address/Proxy setting	118
Checking the MAC address	118
Network Standby	118
The Other Setup menu	119
Volume Setup	119
Remote Control Mode Setup	119
Flicker Reduction Setup	120
RF Remote Setup (SC-37 only)	120
EXTENSION Setup (SC-35 only)	120
Multi Channel Input Setup	120
TV	139
TV	139
DVD	140
BD	140
DVR (BDR, HDR)	140
VCR	141
Satellite Set Top Box	141
Satellite Set Top Box (SAT/PVR Combination)	142
Cable Set Top Box	142
Cable Set Top Box (Cable/PVR Combination)	142
CD	142
CD-R	142
Laser Disc Player	142
Cassete Deck	142
Digital Tape	142
MD	142
Specifications	143

Match case Limit results 1 per page

Additional information

124