Pioneer SC-35 Owner's Manual - Page 77
A. Delay, C. Width, Dimension, Panorama, C. Image, Effect, H.gain, Dolby Pliiz Height, V.height
UPC - 884938108751
View all Pioneer SC-35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Using other functions 09 Setting What it does Option(s) DUAL (Dual Mono) Specifies how dual mono CH1 - Channel encoded Dolby Digital 1 is heard only soundtracks should be played. CH2 - Channel Dual mono is not widely used, but 2 is heard only is sometimes necessary when two languages need to be sent to CH1 CH2 - separate channels. Both channels heard from front speakers DRC (Dynamic Range Control) Adjusts the level of dynamic range for movie soundtracks optimized for Dolby Digital, DTS, Dolby Digital Plus, Dolby TrueHD, DTS-HD and DTS-HD Master Audio (you may need to use this feature when listening to surround sound at low volumes). AUTOd MAX MID OFF LFE (LFE Attenuate) Some audio sources include ultra-low bass tones. Set the LFE attenuator as necessary to prevent the ultra-low bass tones from distorting the sound from the speakers. 0dB/ -5dB/ -10dB/ -15dB/ -20dB OFF The LFE is not limited when set to 0 dB, which is the recommended value. When set to -5 dB, -10 dB, -15 dB or -20 dB, the LFE is limited by the respective degree. When OFF is selected, no sound is output from the LFE channel. SACD GAINe Brings out detail in SACDs by maximizing the dynamic range (during digital processing). 0dB +6 dB HDMIf (HDMI Audio) Specifies the routing of the HDMI audio signal out of this receiver (amp) or through to a TV. When THROUGH is selected, no sound is output from this receiver. AMP THROUGH A. DELAY This feature automatically OFF (Auto corrects the audio-to-video delay ON delay) between components connected with an HDMI cable. The audio delay time is set depending on the operational status of the display connected with an HDMI cable. The video delay time is automatically adjusted according to the audio delay time.g C. WIDTHh Provides a better blend of the (Center front speakers by spreading the Width) center channel between the front (Applicable right and left speakers, making it only when sound wider (higher settings) or using a narrower (lower settings). center speaker) 0 to 7 Default: 3 Setting What it does Option(s) DIMENSIONh Adjusts the depth of the surround sound balance from front to back, making the sound more distant (minus settings), or more forward (positive settings). -3 to +3 Default: 0 PANORAMAh Extends the front stereo image to OFF include the surround speakers for ON a 'wraparound' effect. C. IMAGEi (Center Image) (Applicable only when using a center speaker) Adjusts the center image to create a wider stereo effect with vocals. Adjust the effect from 0 (all center channel sent to front right and left speakers) to 10 (center channel sent to the center speaker only). 0 to 10 Defaults: Neo:6 MUSIC: 3 Neo:6 CINEMA: 10 EFFECT Sets the effect level for the currently selected Advanced Surround or ALC mode (each mode can be set separately). 10 to 90 Defaults: EXT.STEREO: 90 Others: 50 H.GAIN (Height Gain) Adjusts the output from the front height speaker when listening in DOLBY PLIIz HEIGHT mode. If set to HIGH, the sound from the top will be more emphasized. LOW MID HIGH V.SB When you're not using surround OFF (Virtual back speakers, selecting this ON Surround mode allows you to hear a virtual Back) surround back channel through your surround speakers. You can choose to listen to sources with no surround back channel information, or if the material sounds better in the format (for example, 5.1) for which it was originally encoded, you can have the receiver only apply this effect to 6.1 encoded sources like Dolby Digital EX or DTS-ES.j V.HEIGHT When you're not using front OFF (Virtual height speakers, selecting this ON Height) mode allows you to hear a virtual front height channel through your front speakers.k a.The adjustment can be made only when TONE is set to ON. b.With the iPod/USB, HOME MEDIA GALLERY (SC-37 only), INTERNET RADIO (SC-35 only) or ADAPTER PORT input function, by default S.RTRV is set to ON. c.UP1 to UP4 can be selected only when the front height speaker is connected. The presence or absence of effects depends on the listening mode. d.The initially set AUTO is only available for Dolby TrueHD signals. Select MAX or MID for signals other than Dolby TrueHD. e.You shouldn't have any problems using this with most SACD discs, but if the sound distorts, it is best to switch the gain setting back to 0 dB. 77 En