Pioneer SC-35 Owner's Manual - Page 88
Using multi operations, Using System off, Controlling components, MULTI OPERATE
UPC - 884938108751
View all Pioneer SC-35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
10 Controlling the rest of your system (In case of SC-37) 8 Repeat steps 5 to 7 to program a sequence of up to commands. 9 When you're finished, use / to select 'EDIT EXIT' from the menu and press ENTER. You will return to the remote control Setup menu. Select EXIT SETUP to exit. Using multi operations You can start multi operations with the receiver switched on, or in standby. RECEIVER MAIN SOURCE BD TV USB iPod ZONE2 DVD 3 MULTI OPERATION BDR DVR HDMI NET RADIO CD HMG ADAPTER TUNER OPTION 1 2 MULTI CH 1 Press MULTI OPERATION. MULTI OPERATE flashes in the display. 2 Press an input function button that has been set up with a multi operation. The receiver switches on (if it was in standby) and the programmed multi operation is performed automatically.1 Using System off RECEIVER MAIN SOURCE BD TV USB iPod ZONE2 DVD 3 MULTI OPERATION BDR DVR HDMI NET RADIO CD HMG ADAPTER TUNER OPTION 1 2 MULTI CH 1 Press MULTI OPERATION. MULTI OPERATE flashes in the display. 2 Press SOURCE. The command sequence you programmed will run, then all Pioneer components will switch off2, followed by this receiver.3 Controlling components This remote control can control components after entering the proper codes (see Selecting preset codes directly on page 84). Set the remote control operation selector switch to SOURCE, then press the input function buttons to select the component. • TV CONTROL on the remote control are dedicated to control the TV assigned to the TV operation selector switch. If you have two TVs, assign the main TV to the TV operation selector switch. RECEIVER MAIN SOURCE ZONE2 3 MULTI OPERATION BDR BD DVD DVR HDMI NET RADIO TV CD HMG ADAPTER USB iPod TUNER OPTION 1 2 MULTI CH PHONO IN VIDEO CD-R INPUT SELECT LIGHT AUX SOURCE TV RECEIVER CH VOL VOL TV CONTROL INPUT MUTE AUDIO PARAMETER LIST TUNE MUTE VIDEO PARAMETER TOOLS TOP MENU BAND PRESET ENTER T.EDIT GUIDE PRESET CATEGORY HOME MENU iPod CTRL TUNE STATUS PHASE CTRL RETURN PTY SEARCH CH LEVEL THX MPX PQLS MEMORY AUTO/ALC/ DIRECT STEREO STANDARD ADV SURR PGM MENU SIGNAL SEL SLEEP DIMMER AUDIO A.ATT SBch MCACC INFO DISP HDMI OUT D.ACCESS CLR CLASS CH ENTER Note 1 With this remote control, the IR and RF modes can be selected separately for the individual input functions. To perform a multi operation on a device (input function) for which the IR mode is selected, point the remote control toward the remote sensor on that device. 2 In order to avoid accidently switching off a DVD recorder that is currently recording, no DVD recorder power off codes are sent. 3 • With this remote control, the IR and RF modes can be selected separately for the individual input functions. To turn off the power of a device (input function) for which the IR mode is selected using the System Off function, point the remote control toward the remote sensor on that device. • When the power code of another brand is registered, the power on/off operation may be inverted. When using the System Off function for a multi operation including the power codes of other brands, always check that the power of all the components has turned off. 88 En