Pioneer SC-35 Owner's Manual - Page 133
HOME MEDIA GALLERY, Check Sirius Tuner, Acquiring Signal, Subscription Updating, Updating Channels - firmware update
UPC - 884938108751
View all Pioneer SC-35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Additional information 13 Status messages Check Sirius Tuner Acquiring Signal Subscription Updating Updating Channels Invalid Channel Firmware Updating Cause Action The SiriusConnect™ tuner is not properly connected. Check that the 8 pin mini DIN cable and AC Adapter are attached securely. The SIRIUS signal is too weak at the current Check for antenna obstructions and reposition the location. SIRIUS antenna to get better signal reception. Use the Antenna Aiming option to optimize the antenna position. Unit is updating subscription. Wait until the channel subscription has been updated. Unit is updating the channel information. Wait until the channel information has been updated. Selected channel is not available/does not Select another channel. exist. The SiriusConnect™ tuner's firmware is being updated. Wait for updating to finish. HOME MEDIA GALLERY (SC-37 only) Symptoms Causes Remedies Cannot access the network. The LAN cable is not firmly connected. Firmly connect the LAN cable (page 38). The router is not switched on. Switch on the router. Internet security software is currently installed in There are cases where a component with Internet the connected component. security software installed cannot be accessed. The audio component on the network which has Switch on the audio component on the network been switched off is switched on. before switching on this receiver. Playback does not start while The component is currently disconnected from 'Connecting...' continues to this receiver or the power supply. be displayed. Check whether the component is properly connected to this receiver or the power supply. The PC or Internet radio is not The corresponding IP address is not properly set. Switch on the built-in DHCP server function of properly operated. your router, or set up the network manually according to your network environment (page 117). The IP address is being automatically configured. The automatic configuration process takes time. Please wait. The audio files stored on components on the network, such as a PC, cannot be played back. Windows Media Player 11 or Windows Media Install Windows Media Player 11 or Windows Player 12 is not currently installed on your PC. Media Player 12 on your PC (page 64). Audio files were recorded in formats other than Play back audio files recorded in MP3, WAV MP3, WAV (LPCM only), MPEG-4 AAC, FLAC, and (LPCM only), MPEG-4 AAC, FLAC, or WMA. Note WMA. that some audio files recorded in these formats may not be played back on this receiver. Audio files recorded in MPEG-4 AAC or FLAC are Audio files recorded in MPEG-4 AAC or FLAC being played back on Windows Media Player 11 or cannot be played back on Windows Media Player Windows Media Player 12. 11 or Windows Media Player 12. Try using another server. Refer to the operation manual supplied with your server. The component connected to the network is not Check whether the component is affected by properly operated. special circumstances or is in the sleep mode. Try rebooting the component if necessary. The component connected to the network does Try changing the settings for the component not permit file sharing. connected to the network. The folder stored on the component connected to Check the folder stored on the component the network has been deleted or damaged. connected to the network. 133 En