Sony STR-DN1070 Help Guide Printable PDF - Page 106

3 Select the desired speaker pattern according to the speaker installation example displayed on the TV screen, then select [Save]. 4 Select the setting you want (*). Off: When none of the connections above is used. Front B: When using the front B speaker connection. Bi-Amp: When using the bi-amplifier speaker connection. * The displayed settings vary depending on the speaker pattern you selected. Note You can only set [Surround Back Speaker Assign] under the following conditions: The speaker pattern is set to a setting without surround back and front high speakers. Headphones are not connected. [Bluetooth Mode] is set to other than [Transmitter]. [148] Adjusting Settings Speaker Settings Setting the priority on the surround back speakers or Zone 2 speakers (SURROUND BACK/ZONE2 Priority) When speakers are connected to both the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B terminals and SPEAKERS ZONE 2 terminals, you can set which speakers are given priority. 1 Select [Setup] - [Speaker Settings] from the home menu. 2 Select [SURROUND BACK/ZONE2 Priority]. 3 Select the setting you want. ZONE2 Terminals: Priority is placed on the SPEAKERS ZONE 2 terminals. SURROUND BACK Terminals: Priority is placed on the SURROUND BACK/BIAMP/FRONT HIGH/FRONT B terminals and the SPEAKERS ZONE 2 terminals are disabled. Note When [Zone2 Power] is set to [Off], the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B terminals are enabled even if [ZONE2 Terminals] is selected. When [ZONE2 Terminals] is selected and [Zone2 Power] is set to [On], [Zone2 Power] will be set to [Off] automatically if the [Speaker Pattern] is set to [5.0] or higher. [149] Adjusting Settings Speaker Settings Adjusting the speaker size (Size) You can adjust the size of each speaker (front left/right, front high left/right, center, surround left/right, surround back left/right).