Sony STR-DN1070 Help Guide Printable PDF - Page 87
Enjoying sound using another amplifier in Zone 2
View all Sony STR-DN1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
1 Select [Setup] - [Zone Settings] from the home menu. 2 Select [Zone2 Line Out]. 3 Select the setting you want. Variable: Recommended when using another amplifier that does not have volume control for Zone 2. The volume for the ZONE 2 OUT jacks can be changed. Fixed: Recommended when using another amplifier with variable volume control for Zone 2. The volume for the ZONE 2 OUT jacks is fixed. Note When [Variable] is set, the volume is turned down by default. Turn up the volume while listening to the sound after completing setup. The volume for the SPEAKERS ZONE 2 terminals is changed together with the volume for the ZONE 2 OUT jacks. [111] Using the Multi-Zone Features Enjoying sound from speakers located in other rooms using another amplifier Enjoying sound using another amplifier in Zone 2 You can enjoy sound from the receiver in Zone 2 by the following procedure. 1 Turn on the amplifier in Zone 2. 2 Select [Zone Controls] - [Zone2 Power] from the home menu. 3 Select [On]. Zone 2 is activated. 4 Select [Zone Controls] - [Zone2 Input] from the home menu. 5 Select the source signals you want to output. 6 Adjust to a suitable volume. Adjust the volume using the amplifier in Zone 2. If you set [Zone2 Line Out] to [Variable], you can also adjust the volume in Zone 2 using [Zone Controls] - [Zone2 Volume] from the home menu. Hint You can also activate Zone 2 using ZONE SELECT and ZONE POWER on the receiver. You can also select source signals you want to output using INPUT SELECTOR on the receiver while [2. xxxx (input name)] is shown on the display panel. You can also adjust volume using MASTER VOLUME on the receiver while [2. xxxx (input name)] is shown on the display panel.