Sony STR-DN1070 Help Guide Printable PDF - Page 28
Connecting a TV and a projector, Connecting a TV without HDMI jacks
View all Sony STR-DN1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Hint If the HDMI jack of the TV (labeled "ARC") is already connected to another device, disconnect the device and connect the receiver. Connecting a TV and a projector HDMI cable (not supplied) Note Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Be sure to use a High Speed HDMI Cable with Ethernet. Premium High Speed HDMI Cable with Ethernet that supports 18 Gbps is required for 4K/60p 4:4:4, 4:2:2, and 4K/60p 4:2:0 10 bit, etc. To use this connection, select [Setup] - [HDMI Settings], and set [HDMI Out B Mode] to [Main]. Connecting a TV without HDMI jacks Solid lines show recommended connections and the dashed lines show alternative connections for audio signals. It is not necessary to connect all the cables. Video cable (not supplied) Audio cable (not supplied) Optical digital cable (not supplied) Note Connect a TV monitor or a projector to the HDMI OUT A (TV), HDMI OUT B/HDMI ZONE or MONITOR OUT jack on the receiver. Depending on the status of the connection between the TV and the antenna (aerial), the image on the TV screen may be distorted. If this is the case, place the antenna (aerial) farther away from the receiver. Hint When connecting a TV to the receiver via the TV IN jacks of the receiver, set the sound output jack of the TV to "Fixed" if it can be switched between "Fixed" or "Variable." [25] Preparation 3. Connecting a TV