Sony STR-DN1070 Help Guide Printable PDF - Page 84

Monaural audio cable (not supplied) Speaker cable (not supplied) After you have connected the Zone 3 speakers, set [Surround Speaker Assign] to [Zone3] in the [Speaker Settings] menu. Note You can only enable the SPEAKERS ZONE 2 terminals if you set [SURROUND BACK/ZONE2 Priority] to [ZONE2 Terminals] in the [Speaker Settings] menu, and set [Zone2 Power] to [On] in the [Zone Controls] menu. You can only set [Surround Speaker Assign] if the speaker pattern is set to a setting that does not have surround speakers. Only audio signals from [USB], [Bluetooth] (while in BLUETOOTH RX mode only), [Home Network], [Music Services], [FM TUNER] and audio signals input from AUDIO IN jacks are output to the Zone 2 and Zone 3 speakers. External digital input from OPTICAL IN, COAXIAL IN, HDMI IN jacks and Screen mirroring cannot be output to Zone 2 and Zone 3. [106] Using the Multi-Zone Features Enjoying sound from speakers located in other rooms Setting the priority on the surround back speakers or Zone 2 speakers (SURROUND BACK/ZONE2 Priority) When speakers are connected to both the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B terminals and SPEAKERS ZONE 2 terminals, you can set which speakers are given priority. 1 Select [Setup] - [Speaker Settings] from the home menu. 2 Select [SURROUND BACK/ZONE2 Priority]. 3 Select the setting you want. ZONE2 Terminals: Priority is placed on the SPEAKERS ZONE 2 terminals. SURROUND BACK Terminals: Priority is placed on the SURROUND BACK/BIAMP/FRONT HIGH/FRONT B terminals and the SPEAKERS ZONE 2 terminals are disabled. Note When [Zone2 Power] is set to [Off], the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B terminals are enabled even if [ZONE2 Terminals] is selected.