Sony STR-DN1070 Help Guide Printable PDF - Page 89
connections HDMI Zone
View all Sony STR-DN1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
from a device connected to the receiver in another room (HDMI zone). Note When [Zone] is selected, the Control for HDMI function does not work. For details on selecting the HDMI zone input, see "Enjoying video and sound in another location by connecting another amplifier or TV using HDMI connections (HDMI Zone)." [114] Using the Multi-Zone Features Enjoying video and sound in another room using a TV or another receiver Setting the priority for the main zone (Priority) If you select the same HDMI input for the main zone and HDMI zone when the HDMI zone function is enabled, there may be some interference to the audio and video signals in the main zone. To avoid possible interference, you can place priority on the main zone for HDMI input selection. 1 Select [Setup] - [HDMI Settings] from the home menu. 2 Select [Priority]. 3 Select the setting you want. Main & Zone: You can enjoy the same input in the main zone and HDMI zone. However, there may be some interference between the audio and video signals in the main zone and those in the HDMI zone. Main Only: You can enjoy good audio and video quality in the main zone. However, if the same input is selected in HDMI zone, there will be no video or audio output from HDMI zone. Note This function works only when [HDMI Out B Mode] is set to [Zone]. Hint If you connect TVs that have different resolutions to the main zone and HDMI zone but select the same HDMI input for both zones, the lower of the two resolutions is used for the video signals output to both TVs. [115] Using the Multi-Zone Features Enjoying video and sound in another room using a TV or another receiver Enjoying video and sound in another location by connecting another amplifier or TV using HDMI connections (HDMI Zone) You can enjoy sound from the receiver in the HDMI zone by following the steps below. 1 Turn on the amplifier or TV in the HDMI zone. 2 Select [Zone Controls] - [HDMI Zone Power] from the home menu.