Sony STR-DN1070 Help Guide Printable PDF - Page 117
Adjusting the volume automatically Advanced Auto, Volume, Selecting the language of digital
View all Sony STR-DN1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
3 Select the setting you want. 0 ms - 20 ms: You can adjust the gap from 0 ms to 20 ms in 0.5 ms intervals. Note This function does not work in the following cases: Headphones are connected. [Bluetooth Mode] is set to [Transmitter]. [DSD Native] is set to [On] and a DSD file is played back. [168] Adjusting Settings Audio Settings Adjusting the volume automatically (Advanced Auto Volume) When this function is set to [On], the receiver can adjust its volume automatically depending on the input signal or content from a connected device. This function is useful, for example, when the sound of commercials is louder than a TV program. 1 Select [Setup] - [Audio Settings] from the home menu. 2 Select [Advanced Auto Volume]. 3 Select [On] or [Off]. Note Be sure to reduce the volume level before you turn this function on or off. The Advanced Auto Volume function may not work, depending on the audio format. This function does not work in the following cases: [Bluetooth Mode] is set to [Transmitter]. [DSD Native] is set to [On] and a DSD file is played back. [169] Adjusting Settings Audio Settings Selecting the language of digital broadcasts (Dual Mono) You can select the language you want when listening to a digital broadcast with dual audio. This function only works for Dolby Digital sources. 1 Select [Setup] - [Audio Settings] from the home menu. 2 Select [Dual Mono]. 3 Select the setting you want. Main: Sound in the main language will be output. Sub: Sound in the sub language will be output.