Sony STR-DN1070 Help Guide Printable PDF - Page 131

Turning on the control mode for maintenance (External Control) You can set whether a dedicated controller (home automation controller) on the home network is allowed to control the receiver. 1 Select [Setup] - [Network Settings] from the home menu. 2 Select [External Control]. 3 Select [On] or [Off]. [198] Adjusting Settings Bluetooth Settings Selecting the BLUETOOTH mode (Bluetooth Mode) You can enjoy content from remote devices via this receiver, or listen to sound from this receiver via a BLUETOOTH receiver such as headphones. 1 Select [Setup] - [Bluetooth Settings] from the home menu. 2 Select [Bluetooth Mode]. 3 Select the setting you want. Receiver: The receiver is in receiver mode which enables it to receive and output audio from a BLUETOOTH device. Transmitter: The receiver is in transmitter mode which enables it to send audio to a BLUETOOTH receiver (such as headphones). [BT TX] appears on the display panel. Off: The BLUETOOTH power is turned off and [Listen] - [Bluetooth] cannot be selected from the home menu. Note [Bluetooth Mode] cannot be switched while the input of the receiver is set to [Bluetooth] or [Screen mirroring]. No sound is output from the speakers connected to the receiver when [Bluetooth Mode] is set to [Transmitter]. In [Transmitter] mode, the receiver can send audio to up to 1 device. Hint You can set the transmission data rate for LDAC playback using [Wireless Playback Quality] in the [Bluetooth Settings] menu. If you connect to the receiver from your smartphone while [Transmitter] is selected and no other BLUETOOTH receiver is connected to the receiver, the setting automatically switches to [Receiver] and you can listen to the sound from your smartphone via the receiver. You can also switch between [Receiver] (RX) mode and [Transmitter] (TX) by pressing RX/TX on the remote control. Depending on the BLUETOOTH receiver, you can adjust the volume of the BLUETOOTH receiver from the receiver when [Transmitter] is selected.