Sony STR-DN1070 Help Guide Printable PDF - Page 85
Assigning speakers for Zone 3, Enjoying sound in Zone 2 and/or Zone 3
View all Sony STR-DN1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
When [ZONE2 Terminals] is selected and [Zone2 Power] is set to [On], [Zone2 Power] will be set to [Off] automatically if the [Speaker Pattern] is set to [5.0] or higher. [107] Using the Multi-Zone Features Enjoying sound from speakers located in other rooms Assigning speakers for Zone 3 You can assign the speakers installed in Zone 3 as Zone 3 speakers. Follow the procedure below after connecting the speakers installed in Zone 3 to the SPEAKERS SURROUND/ZONE 3 terminals of the receiver. 1 Select [Setup] - [Speaker Settings] from the home menu. 2 Select [Speaker Pattern]. 3 Select one of the following speaker patterns displayed on the TV screen: 3.1, 3.0, 2.1 or 2.0, and select [Save]. 4 Select [Surround Speaker Assign] - [Zone3]. Note You cannot set the SPEAKERS SURROUND/ZONE 3 terminals for a Zone 3 connection if a speaker pattern with surround speakers is set. [108] Using the Multi-Zone Features Enjoying sound from speakers located in other rooms Enjoying sound in Zone 2 and/or Zone 3 You can enjoy sound from the receiver in Zone 2 and/or Zone 3 by the following procedure. 1 Select [Zone Controls] - [Zone2 Power] or [Zone3 Power] from the home menu. 2 Select [On]. The selected zone is activated. 3 Select [Zone Controls] - [Zone2 Input] or [Zone3 Input] from the home menu. 4 Select the source signals you want to output. Select [SOURCE] if you want to listen to the same sound as main zone in Zone 2 or Zone 3. 5 Select [Zone Controls] - [Zone2 Volume] or [Zone3 Volume] from the home menu. 6 Adjust to a suitable volume.