Sony STR-DN1070 Help Guide Printable PDF - Page 109
Setting the crossover frequency of the speakers, Crossover Frequency, Adjusting the equalizer
View all Sony STR-DN1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
To output a test tone from adjacent speakers See "Adjusting the balance between adjacent speakers by outputting a test tone (Phase Noise)." To output the source sound from adjacent speakers See "Adjusting the balance between adjacent speakers by outputting a source sound (Phase Audio)." [153] Adjusting Settings Speaker Settings Setting the crossover frequency of the speakers (Crossover Frequency) You can set the bass crossover frequency of speakers for which the speaker size has been set to [Small] in the [Speaker Settings] menu. A measured speaker crossover frequency is set for each speaker after the Auto Calibration is performed. 1 Select [Setup] - [Speaker Settings] from the home menu. 2 Select [Crossover Frequency]. 3 Select the speaker for which you want to adjust the crossover frequency on the screen. 4 Press / to set the crossover frequency. Note This function does not work in the following cases: Headphones are connected. [Bluetooth Mode] is set to [Transmitter]. [Size] for none of the speakers is set to [Small]. The surround back speakers will be set to the same setting as that of the surround speakers. [154] Adjusting Settings Speaker Settings Adjusting the equalizer (Equalizer) You can use the following parameters to adjust the tonal quality (bass/treble level) of the front, center, surround/surround back and front high speakers. Level (dB) Frequency (Hz) Bass Treble 1 Select [Setup] - [Speaker Settings] from the home menu.