Sony STR-DN1070 Help Guide Printable PDF - Page 150
The RDS information that you want does not appear
View all Sony STR-DN1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
The FM stereo reception is poor. Perform the following procedure to set the FM station receiving mode to the monaural mode. 1 Select [Listen] - [FM TUNER] from the home menu. 2 Select a station on the FM band. 3 Press OPTIONS. 4 Select [FM Mode] from the menu. 5 Select [Monaural]. Note You can set FM mode in the options menu if the frequency indication is selected in step 3. [253] Troubleshooting Tuner You cannot tune to radio stations. Check that the antennas (aerials) are connected securely. Adjust the antennas (aerials) if necessary. The signal of the stations is too weak with automatic tuning. Use direct tuning. No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations is used). Preset the stations. Press DISPLAY MODE on the receiver repeatedly so that the frequency appears on the display panel. [254] Troubleshooting Tuner RDS does not work (for European and Oceanian models only). Make sure that you are tuned to an FM RDS station. Select a stronger FM station. The station you tuned to is not transmitting the RDS signal or the signal is weak. [255] Troubleshooting Tuner The RDS information that you want does not appear (for European and Oceanian models only). The service may be temporarily out of order. Contact the radio station and find out whether they actually provide the service in question.