VMware VS4-STD-C Evaluator Guide - Page 59
The localcli Command, esxcli
View all VMware VS4-STD-C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
VMware vSphere 5.0 Evaluation Guide - Volume One Figure 71. esxcli Command with -formatter Option from the ESXi Shell Now we have a short list giving us just the information we need. The localcli Command The esxcli command talks to the ESXi hosts through the hostd service. In rare circumstances, when the hostd service might not be responding, the localcli command can be used. The localcli command is equivalent to esxcli with the exception that it bypasses hostd. The localcli command is only intended for situations when hostd is unavailable and cannot be restarted. After you run the localcli command, you must restart hostd. Run esxcli commands after the restart. NOTE: Use the localcli command only under the direction of VMware technical support, because improper use can result in an inconsistent system state and potential failure of the ESXi host. The following example shows the use of the localcli command to display all network adaptors on a host: Figure 72. localcli Command Example TECHNICAL WHITE PAPER / 59