Yamaha MU100R MU100R Owners Manual - Page 133

Breath Noise, Growl

Page 133 highlights

Multi Edit Mode Scream Control Depth (ScrCtrlDpt) Settings: -64 - +63 Breath Noise Control Depth (BnzCtrlDpt) Settings: -64 - +63 Sets the amount of variation produced by the controller assigned to scream. The higher the value the greater the variation. Positive values cause an increase in scream effect in response to higher controller values (e.g., increased breath pressure or higher modulation wheel position), while negative values cause a decrease in scream effect in response to higher controller values. Sets the amount of variation produced by the controller assigned to breath noise. The higher the value the greater the variation. Positive values cause an increase in breath noise in response to higher controller values (e.g., increased breath pressure or higher modulation wheel position), while negative values cause a decrease in breath noise in response to higher controller values. Breath Noise Breath Noise Control Change Number (Bnz CC No.) Settings: off, 01 - 31, off, 33 - 95, AT, VEL, PB Growl Growl Control Change Number (Grl CC No.) Settings: off, 01 - 31, off, 33 - 95, AT, VEL, PB "Breath Noise" can be used to add the required amount of breath noise to a Voice. The "Bnz CC No." parameter specifies the controller to be used for breath noise control. When set to "off", no breath noise variation can be produced via a controller, but a continuous breath noise value is determined by the "BnzCtrlDpt" parameter, below (negative values increase the breath noise level). Details • The "BnzCtrlDpt" parameter (below) must be set to an appropriate value (higher than "+01" or lower than "-01") for breath noise control to have any effect. "Growl" produces a periodic pressure modulation which produces the "growl" effect often heard in wind instruments. The "Grl CC No." parameter specifies the controller to be used for growl control. When set to "off", no growl variation can be produced via a controller, but a continuous growl value is determined by the "GrlCtrlDpt" parameter, below (negative values increase the growl level). Details • The "GrlCtrlDpt" parameter (below) must be set to an appropriate value (higher than "+01" or lower than "-01") for growl control to have any effect. 122 Multi Mode

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200

122
Multi Mode
Scream Control Depth (ScrCtrlDpt)
Settings:
-64 — +63
Sets the amount of variation produced by
the controller assigned to scream. The
higher the value the greater the variation.
Positive values cause an increase in
scream effect in response to higher con-
troller values (e.g., increased breath pres-
sure or higher modulation wheel posi-
tion), while negative values cause a de-
crease in scream effect in response to
higher controller values.
Breath Noise
Breath Noise Control Change Num-
ber (Bnz CC No.)
Settings:
off, 01 — 31, off, 33 — 95,
AT, VEL, PB
“Breath Noise” can be used to add the
required amount of breath noise to a
Voice. The “Bnz CC No.” parameter
specifies the controller to be used for
breath noise control. When set to “off”,
no breath noise variation can be produced
via a controller, but a continuous breath
noise value is determined by the
“BnzCtrlDpt” parameter, below (negative
values increase the breath noise level).
Details
The “BnzCtrlDpt” parameter (below) must
be set to an appropriate value (higher than
“+01” or lower than “-01”) for breath noise
control to have any effect.
Breath Noise Control Depth (BnzCtrlDpt)
Settings:
-64 — +63
Sets the amount of variation produced by
the controller assigned to breath noise.
The higher the value the greater the varia-
tion. Positive values cause an increase in
breath noise in response to higher con-
troller values (e.g., increased breath pres-
sure or higher modulation wheel posi-
tion), while negative values cause a de-
crease in breath noise in response to
higher controller values.
Growl
Growl Control Change Number (Grl
CC No.)
Settings:
off, 01 — 31, off, 33 — 95,
AT, VEL, PB
“Growl” produces a periodic pressure
modulation which produces the “growl”
effect often heard in wind instruments.
The “Grl CC No.” parameter specifies the
controller to be used for growl control.
When set to “off”, no growl variation can
be produced via a controller, but a con-
tinuous growl value is determined by the
“GrlCtrlDpt” parameter, below (negative
values increase the growl level).
Details
• The “GrlCtrlDpt” parameter (below) must
be set to an appropriate value (higher than
“+01” or lower than “-01”) for growl con-
trol to have any effect.
Multi Edit Mode