Yamaha MU100R MU100R Owners Manual - Page 61
Setting Up a Keyboard Split
![]() |
View all Yamaha MU100R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Editing in the Performance Mode ; Change the Vibrato Rate, Depth, and Delay settings. Select one of the Parts and set the Vibrato parameters as follows: Rate: +15 Depth: +04 Delay: +15 This produces a delayed vibrato for Part 1; in other words, the vibrato effect starts after the keys have been held for a while. Notes played staccato have no vibrato. a Exit back to the Single Part control display. Press the [PLAY] button. Setting Up a Keyboard Split In the following steps, you'll assign two different Parts to separate sections of the keyboard. Operation 1 Select Part 2 and select a new Voice for it: "NewAgePd" (089). From the Single Part display, use [PART -/+] buttons to select Part 2. Then select Voice 089 in the normal way. (Keep Part 1's Voice set to "HeavySyn," 082, as set in step #4 of "Creating a Two-Voice Layer" above.) 2 Change the Note Limit High setting for Part 1. The Note Limit parameters determines the range of notes over which the Part will sound. To set this: 1) In Edit menu select and call up the "PART" menu, then do the same with the "OTHERS" menu. 2) Select Part 1. 3) Select and change the "NoteLimitH" setting to "B2." (Leave the "NoteLimitL" setting unchanged.) 3 Change the Note Limit Low setting for Part 2. 1) Select Part 2. 2) Select and change the "NoteLimitL" setting to "C3." (Leave the "NoteLimitH" setting unchanged.) Playing notes below middle C on the keyboard plays the synth bass sound, while notes above middle C play the "New Age" pad. Hint • You may want to raise the octave setting of Part 1. To do this, exit to Single Part, select Part 1, then use the [SELECT >] buttons to select the Note Shift control. For a higher "HeavySyn" Voice, set this to "+00.") 50 Guided Tour
![](/manual_guide/products/yamaha-mu100r-mu100r-owners-manual-da522dd/61.png)