Yamaha MU100R MU100R Owners Manual - Page 80

Playing and Editing VL Voices Selecting VL Voice banks and VL Voices The VL Voices can be selected in the much the same way as the XG Voices. Selecting VL Voices from an External Device If you want to control the MU100R including the VL tone generator section by using sequencing software and/or use the tone generator without panel buttons (e.g., sound card), you'll need to transmit the MIDI messages such as XG System On, Bank Select MSB/LSB and program change to the MU100R by using the sequencing software which is capable of editing and transmitting system exclusive messages. Refer to the MIDI Data Format in the "Sound List & MIDI Data" booklet. Operation 1 Make sure that the XG or Performance mode is selected. For information on selecting the Sound Module mode, see page 172. 2 Assign one of the Parts for playing VL Voices. Only one Part can be used for the VL Voices, and this must be properly assigned. To do this: 1) Press the [UTIL] button. 2) Select "PLUGIN" (with the [SELECT >] button) and press the [ENTER] button. 3) Select "PLG100-VL" (VL Voices) with the [SELECT