ZyXEL ISG50-PSTN User Guide - Page 118

Chapter 7 General Tutorials 7.5.2 Set Up User Groups Set up the user groups and assign the users to the user groups. 1 Click Configuration > Object > User/Group > Group. Click the Add icon. 2 Enter the name of the group that is used in the example in Table 18 on page 117. In this example, it is "Finance". Then, select User/Leo and click the right arrow to move him to the Member list. This example only has one member in this group, so click OK. Of course you could add more members later. Figure 87 Configuration > Object > User/Group > Group > Add 3 Repeat this process to set up the remaining user groups. 7.5.3 Set Up User Authentication Using the RADIUS Server This step sets up user authentication using the RADIUS server. First, configure the settings for the RADIUS server. Then, set up the authentication method, and configure the ISG50 to use the authentication method. Finally, force users to log in to the ISG50 before it routes traffic for them. 1 Click Configuration > Object > AAA Server > RADIUS. Double-click the radius entry. Configure the RADIUS server's address authentication port (1812 if you were not told otherwise), key, and click Apply. 118 ISG50 User's Guide