ZyXEL ISG50-PSTN User Guide - Page 434
Table 142, LABEL, DESCRIPTION, Second Dial
View all ZyXEL ISG50-PSTN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 434 highlights
Chapter 27 Global PBX Settings The following table describes the labels in this screen. Table 142 Configuration > PBX > Global > Feature Code LABEL Group Pickup Call Transfer Direct Pickup Follow Me On Follow Me Off Voice Mail Mobile Extension On DESCRIPTION This code is used to pick up calls for your extension from a different extension in the same authority group. This code is used to transfer calls. This code is used to pick up calls for your extension from a different extension. This code is used to turn the Follow Me feature on for this extension. This code is used to turn the Follow Me feature off for this extension. This code is used to access voice mail on the ISG50. This code is used to activate the mobile extension feature from your regular telephone extension. Once activated, calls are sent both to your extension and to the phone designated as the mobile extension. Mobile Extension Off For example, if your IP PBX extension has been configured to use your cell phone as a mobile extension, you can dial into the ISG50 with your cell phone and then enter this code. That tells the ISG50 to send all calls to your extension to your cell phone. This code is used to turn off the mobile extension feature from your regular telephone extension. Calls are no longer sent simultaneously to both your extension and the mobile extension; they are sent strictly to your regular extension. Mobile Extension Auto Call Recording On Demand Second Dial For example, if all calls currently incoming to your extension are sent to your cell phone, you can dial into the ISG50 and then enter this code. That tells the ISG50 to stop sending calls intended for your extension to your cell phone. This code changes the mobile extension feature's setting from off to on or from on to off. For example, if you use this code when the mobile extension feature is turned on, it turns it off. If you use this code when the mobile extension feature is turned off, it turns it on. Use this code to start recording the current call. The on-demand call recording option must also be enabled in the call recording setup. See Section 35.2 on page 545. This code is used to get a second dial tone. When you enter the Second Dial code from your phone, the ISG50 opens a connection to the outside telephone network. For example, in many office environments you cannot access an outside dial tone unless you press "9" or "0" first. A number dialed without such a prefix is considered internal and thus routed to the appropriate extension. If that extension does not exist, an error is returned. Leave this field blank if you do not require people using your telephone network to dial a specific number to access an outside line. Note: You only need to enable this function if your phone network is analog-based (such as one that uses FXS). Digital phone systems such as SIP and BRI do not require it. Internal Operator (0 or 9) Apply Reset Note: If you enable this function on a digital network, a person does not need to use the Second Dial number in conjunction with any phone numbers dialed. Use the first field of this code to set which number (0 or 9) internal users dial to reach the internal operator. Use the second field to specify the operator's extension number. The extension must already exist in the ISG50. Click this to save your changes. Click this to set every field in this screen to its last-saved value. 434 ISG50 User's Guide