ZyXEL ISG50-PSTN User Guide - Page 681
Table 274, Label, Description
View all ZyXEL ISG50-PSTN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 681 highlights
Chapter 52 System The following table describes the labels in this screen. Table 274 Configuration > System > WWW > Service Control LABEL HTTPS Enable Server Port Authenticate Client Certificates Server Certificate Redirect HTTP to HTTPS Admin/User Service Control DESCRIPTION Select the check box to allow or disallow the computer with the IP address that matches the IP address(es) in the Service Control table to access the ISG50 Web Configurator using secure HTTPs connections. The HTTPS server listens on port 443 by default. If you change the HTTPS server port to a different number on the ISG50, for example 8443, then you must notify people who need to access the ISG50 Web Configurator to use "https://ISG50 IP Address:8443" as the URL. Select Authenticate Client Certificates (optional) to require the SSL client to authenticate itself to the ISG50 by sending the ISG50 a certificate. To do that the SSL client must have a CA-signed certificate from a CA that has been imported as a trusted CA on the ISG50 (see Section 52.7.7.4 on page 688 on importing certificates for details). Select a certificate the HTTPS server (the ISG50) uses to authenticate itself to the HTTPS client. You must have certificates already configured in the My Certificates screen. To allow only secure Web Configurator access, select this to redirect all HTTP connection requests to the HTTPS server. Admin Service Control specifies from which zones an administrator can use HTTPS to manage the ISG50 (using the Web Configurator). You can also specify the IP addresses from which the administrators can manage the ISG50. Add Edit Remove Move # User Service Control specifies from which zones a user can use HTTPS to log into the ISG50. You can also specify the IP addresses from which the users can access the ISG50. Click this to create a new entry. Select an entry and click Add to create a new entry after the selected entry. Double-click an entry or select it and click Edit to be able to modify the entry's settings. To remove an entry, select it and click Remove. The ISG50 confirms you want to remove it before doing so. Note that subsequent entries move up by one when you take this action. To change an entry's position in the numbered list, select the method and click Move to display a field to type a number for where you want to put it and press [ENTER] to move the rule to the number that you typed. This is the index number of the service control rule. Zone Address Action HTTP The entry with a hyphen (-) instead of a number is the ISG50's (nonconfigurable) default policy. The ISG50 applies this to traffic that does not match any other configured rule. It is not an editable rule. To apply other behavior, configure a rule that traffic will match so the ISG50 will not have to use the default policy. This is the zone on the ISG50 the user is allowed or denied to access. This is the object name of the IP address(es) with which the computer is allowed or denied to access. This displays whether the computer with the IP address specified above can access the ISG50 zone(s) configured in the Zone field (Accept) or not (Deny). ISG50 User's Guide 681