ZyXEL ISG50-PSTN User Guide - Page 614

Chapter 45 Addresses The Address screen provides a summary of all addresses in the ISG50. To access this screen, click Configuration > Object > Address > Address. Click a column's heading cell to sort the table entries by that column's criteria. Click the heading cell again to reverse the sort order. Figure 409 Configuration > Object > Address > Address The following table describes the labels in this screen. See Section 45.2.1 on page 614 for more information as well. Table 238 Configuration > Object > Address > Address LABEL DESCRIPTION Add Click this to create a new entry. Edit Double-click an entry or select it and click Edit to be able to modify the entry's settings. Remove To remove an entry, select it and click Remove. The ISG50 confirms you want to remove it before doing so. Object References Select an entry and click Object References to open a screen that shows which settings use the entry. See Section 12.3.2 on page 246 for an example. # This field is a sequential value, and it is not associated with a specific address. Name This field displays the configured name of each address object. Type This field displays the type of each address object. "INTERFACE" means the object uses the settings of one of the ISG50's interfaces. Address This field displays the IP addresses represented by each address object. If the object's settings are based on one of the ISG50's interfaces, the name of the interface displays first followed by the object's current address settings. 45.2.1 Address Add/Edit Screen The Configuration > Address Add/Edit screen allows you to create a new address or edit an existing one. To access this screen, go to the Address screen (see Section 45.2 on page 613), and click either the Add icon or an Edit icon. Figure 410 Configuration > Object > Address > Address > Edit 614 ISG50 User's Guide