ZyXEL ISG50-PSTN User Guide - Page 521

Chapter 32 LCR • You have to define your outbound dialing plan. For example, dial a number starting with "0" is for local calls, "200" is for international calls, "3" is a call to branch office, etc. • You should define at least one outbound line group. See Section 30.2 on page 481. 32.2 LCR Use this screen to view outbound dialing rules (LCRs) configured on the ISG50. To access this screen, click Configuration > PBX > Outbound Line Management > LCR. Figure 343 Configuration > PBX > Outbound Line Management > LCR Each field is described in the following table. Table 183 Configuration > PBX > Outbound Line Management > LCR LABEL Add Edit Remove Move DESCRIPTION Click this to create a new entry. Select an entry and click Add to create a new entry after the selected entry. Double-click an entry or select it and click Edit to open a screen where you can modify the entry. To remove one or more entries, select them and click Remove. The ISG50 confirms you want to remove it before doing so. To change a dialing rule's position in the numbered list, select the rule and click Move to display a field to type a number for where you want to put that rule and press [ENTER] to move the rule to the number that you typed. # Name Description The ordering of your rules is important as they are applied in order of their numbering. This is the position of your dialing rule in the global rule list. The ordering of your rules is important as rules are applied in sequence. This is the name of the LCR. This text describes the LCR. 32.2.1 LCR Configuration Use this screen to choose the outbound line groups and create dialing conditions for an LCR. To access this screen, click the Add or Edit icon in the Dial Condition List section of the LCR screen to view the screen as shown. ISG50 User's Guide 521