ZyXEL NBG6716 User Guide - Page 100
No Security
View all ZyXEL NBG6716 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Chapter 11 Wireless LAN Table 31 Network > Wireless LAN 2.4G/5G > General (continued) LABEL DESCRIPTION Security Mode Select Static WEP, WPA-PSK, WPA, WPA2-PSK or WPA2 to add security on this wireless network. The wireless clients which want to associate to this network must have same wireless security settings as this device. After you select to use a security, additional options appears in this screen. See Section 11.3 on page 100 for detailed information on different security modes. Or you can select No Security to allow any client to associate this network without authentication. Apply Cancel Note: If the WPS function is enabled (default), only No Security and WPA2-PSK are available in this field. Click Apply to save your changes back to the NBG6716. Click Cancel to reload the previous configuration for this screen. See the rest of this chapter for information on the other labels in this screen. 11.3 Wireless Security The screen varies depending on what you select in the Security Mode field. 11.3.1 No Security Select No Security to allow wireless clients to communicate with the access points without any data encryption. Note: If you do not enable any wireless security on your NBG6716, your network is accessible to any wireless networking device that is within range. Figure 57 Network > Wireless LAN 2.4G/5G > General: No Security 100 NBG6716 User's Guide