ZyXEL NBG6716 User Guide - Page 190
Table 73, Label, Description
View all ZyXEL NBG6716 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
Chapter 23 Maintenance Table 73 Maintenance > Sys OP Mode (continued) LABEL Access Point Mode DESCRIPTION Select Access Point Mode if your device bridges traffic between clients on the same network. Apply Cancel • In Access Point Mode, all Ethernet ports have the same IP address. • All ports on the rear panel of the device are LAN ports, including the port labeled WAN. There is no WAN port. • The DHCP server on your device is disabled. • Router functions (such as NAT, bandwidth management, remote management, firewall and so on) are not available when the NBG6716 is in Access Point Mode. • The IP address of the device on the local network is set to 192.168.1.2. Click Apply to save your settings. Click Cancel to return your settings to the default (Router). Note: If you select the incorrect system operation Mode you may not be able to connect to the Internet. 190 NBG6716 User's Guide