ZyXEL NBG6716 User Guide - Page 195

Resetting the NBG6716 to Its Factory Defaults, Wireless Connections

Page 195 highlights

Chapter 24 Troubleshooting • Check the settings for QoS. If it is disabled, you might consider activating it. 24.5 Resetting the NBG6716 to Its Factory Defaults If you reset the NBG6716, you lose all of the changes you have made. The NBG6716 re-loads its default settings, and the password resets to 1234. You have to make all of your changes again. You will lose all of your changes when you push the RESET button. To reset the NBG6716: 1 Make sure the power LED is on. 2 Press the RESET button for one to four seconds to restart/reboot the NBG6716. 3 Press the RESET button for longer than five seconds to set the NBG6716 back to its factory-default configurations. If the NBG6716 restarts automatically, wait for the NBG6716 to finish restarting, and log in to the Web Configurator. The password is "1234". If the NBG6716 does not restart automatically, disconnect and reconnect the NBG6716's power. Then, follow the directions above again. 24.6 Wireless Connections I cannot access the NBG6716 or ping any computer from the WLAN. 1 Make sure the wireless LAN is enabled on the NBG6716. 2 Make sure the wireless adapter on your computer is working properly. 3 Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible and supports the same wireless standard as the NBG6716. 4 Make sure your computer (with a wireless adapter installed) is within the transmission range of the NBG6716. 5 Check that both the NBG6716 and the wireless adapter on your computer are using the same wireless and wireless security settings. 6 Make sure traffic between the WLAN and the LAN is not blocked by the firewall on the NBG6716. NBG6716 User's Guide 195

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250

Chapter 24 Troubleshooting
NBG6716 User’s Guide
195
Check the settings for QoS. If it is disabled, you might consider activating it.
24.5
Resetting the NBG6716 to Its Factory Defaults
If you reset the NBG6716, you lose all of the changes you have made. The NBG6716 re-loads its
default settings, and the password resets to
1234
. You have to make all of your changes again.
You will lose all of your changes when you push the
RESET
button.
To reset the NBG6716:
1
Make sure the power LED is on.
2
Press the
RESET
button for one to four seconds to restart/reboot the NBG6716.
3
Press the
RESET
button for longer than five seconds to set the NBG6716 back to its factory-default
configurations.
If the NBG6716 restarts automatically, wait for the NBG6716 to finish restarting, and log in to the
Web Configurator. The password is “1234”.
If the NBG6716 does not restart automatically,
di
sconnect and reconnect the NBG6716’s power.
Then, follow the directions above again.
24.6
Wireless Connections
I cannot access the NBG6716 or ping any computer from the WLAN.
1
Make sure the wireless LAN is enabled on the NBG6716.
2
Make sure the wireless adapter on your computer is working properly.
3
Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible and supports
the same wireless standard as the NBG6716.
4
Make sure your computer (with a wireless adapter installed) is within the transmission range of the
NBG6716.
5
Check that both the NBG6716 and the wireless adapter on your computer are using the same
wireless and wireless security settings.
6
Make sure traffic between the WLAN and the LAN is not blocked by the firewall on the NBG6716.