ZyXEL NBG6716 User Guide - Page 164
Management > Remote, MGMT > Wake On LAN
View all ZyXEL NBG6716 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Chapter 20 Remote Management Use this screen to remotely turn on a device on the network. Click the Management > Remote MGMT > Wake On LAN to open the following screen. Figure 102 Management > Remote MGMT > Wake On LAN The following table describes the labels in this screen. Table 63 Management > Remote MGMT > Wake On LAN LABEL Wake On LAN over WAN Settings Enable WOL over WAN Port Wake On LAN Wake MAC Address DESCRIPTION Select this option to have the NBG6716 forward a WoL "Magic Packet" to all devices on the LAN if the packet comes from the WAN or remote network and uses the port number specified in the Port field. A LAN device whose hardware supports Wake on LAN then will be powered on if it is turned off previously. Type a port number from which a WoL packet is forwarded to the LAN. Enter the MAC Address of the device on the network that will be turned on. Start A MAC address consists of six hexadecimal character pairs. Click this to have the NBG6716 generate a WoL packet and forward it to turn the specified device on. Apply Cancel A screen pops up displaying MAC address error if you input the MAC address incorrectly. Click Apply to save the setting to the NBG6716. Click Cancel to begin configuring this screen afresh. 164 NBG6716 User's Guide