ZyXEL NBG6716 User Guide - Page 133
Port Trigger Screen
View all ZyXEL NBG6716 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Chapter 14 NAT 14.4 Port Trigger Screen To change your NBG6716's trigger port settings, click Network > NAT > Port Trigger. The screen appears as shown. Note: Only one LAN computer can use a trigger port (range) at a time. Figure 82 Network > NAT > Port Trigger The following table describes the labels in this screen. Table 53 Network > NAT > Port Trigger LABEL DESCRIPTION # This is the rule index number (read-only). Name Type a unique name (up to 15 characters) for identification purposes. All characters are permitted - including spaces. Incoming Incoming is a port (or a range of ports) that a server on the WAN uses when it sends out a particular service. The NBG6716 forwards the traffic with this port (or range of ports) to the client computer on the LAN that requested the service. Port Type a port number or the starting port number in a range of port numbers. End Port Type a port number or the ending port number in a range of port numbers. Trigger The trigger port is a port (or a range of ports) that causes (or triggers) the NBG6716 to record the IP address of the LAN computer that sent the traffic to a server on the WAN. Port Type a port number or the starting port number in a range of port numbers. End Port Type a port number or the ending port number in a range of port numbers. Apply Click Apply to save your changes back to the NBG6716. Cancel Click Cancel to begin configuring this screen afresh. NBG6716 User's Guide 133