ZyXEL NBG6716 User Guide - Page 19

Table 1, Status, Description - setup

Page 19 highlights

Chapter 1 Introduction Figure 4 Front Panel Power Internet WLAN 2.4G WAN WLAN 5G WPS Button USB 1-2 LAN 1-4 WPS The following table describes the LEDs and the WPS button. Table 1 Front panel LEDs and WPS button LED WPS Button Power STATUS DESCRIPTION Press this button for 1 second to set up a wireless connection via WiFi Protected Setup with another WPS-enabled client. You must press the WPS button on the client side within 120 seconds for a successful connection. See Section 1.6 on page 17 and Chapter 9 on page 57 for more information on WPS. On The NBG6716 is receiving power and functioning properly. Off The NBG6716 is not receiving power. WAN Internet On Blinking Off On The NBG6716's WAN connection is ready. The NBG6716 is sending/receiving data through the WAN with a 1000Mbps transmission rate. The WAN connection is not ready, or has failed. The NBG6716 has an IP connection but no traffic. WLAN 2.4/5G Blinking Off On Blinking Your device has a WAN IP address (either static or assigned by a DHCP server), PPP negotiation was successfully completed (if used) and the connection is up. The NBG6716 is sending or receiving IP traffic. The NBG6716 does not have an IP connection. The NBG6716 is ready, but is not sending/receiving data through the 5G wireless LAN. The NBG6716 is sending/receiving data through the 5G wireless LAN. LAN 1-4 USB 1-2 Off On Blinking Off On Blinking Off The NBG6716 is negotiating a WPS connection with a wireless client. The wireless LAN is not ready or has failed. The NBG6716's LAN connection is ready. The NBG6716 is sending/receiving data through the LAN with a 1000Mbps transmission rate. The LAN connection is not ready, or has failed. The NBG6716 has a USB device installed. The NBG6716 is transmitting and/or receiving data from routers through an installed USB device. There is no USB device connected to the NBG6716. NBG6716 User's Guide 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250

Chapter 1 Introduction
NBG6716 User’s Guide
19
Figure 4
Front Panel
The following table describes the LEDs and the WPS button.
Table 1
Front panel LEDs and WPS button
LED
STATUS
DESCRIPTION
WPS Button
Press this button for 1 second to set up a wireless connection via WiFi Protected Setup
with another WPS-enabled client. You must press the WPS button on the client side within
120 seconds for a successful connection. See
Section 1.6 on page 17
and
Chapter 9 on
page 57
for more information on WPS.
Power
On
The NBG6716 is receiving power and functioning properly.
Off
The NBG6716 is not receiving power.
WAN
On
The NBG6716’s WAN connection is ready.
Blinking
The NBG6716 is sending/receiving data through the WAN with a 1000Mbps
transmission rate.
Off
The WAN connection is not ready, or has failed.
Internet
On
The NBG6716 has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a DHCP
server), PPP negotiation was successfully completed (if used) and the
connection is up.
Blinking
The NBG6716 is sending or receiving IP traffic.
Off
The NBG6716 does not have an IP connection.
WLAN 2.4/5G
On
The NBG6716 is ready, but is not sending/receiving data through the 5G
wireless LAN.
Blinking
The NBG6716 is sending/receiving data through the 5G wireless LAN.
The NBG6716 is negotiating a WPS connection with a wireless client.
Off
The wireless LAN is not ready or has failed.
LAN 1-4
On
The NBG6716’s LAN connection is ready.
Blinking
The NBG6716 is sending/receiving data through the LAN with a 1000Mbps
transmission rate.
Off
The LAN connection is not ready, or has failed.
USB 1-2
On
The NBG6716 has a USB device installed.
Blinking
The NBG6716 is transmitting and/or receiving data from routers through an
installed USB device.
Off
There is no USB device connected to the NBG6716.
Power
LAN 1-4
WAN
WPS
USB 1-2
WPS
Button
Internet
WLAN 5G
WLAN 2.4G