ZyXEL P-202H User Guide - Page 231
Enabling the Firewall
View all ZyXEL P-202H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
P-202H Plus v2 User's Guide CHAPTER 24 Enabling the Firewall This chapter shows you how to get started with the ZyXEL Device firewall. 24.1 Remote Management and the Firewall When SMT menu 24.11 is configured to allow management (see the Remote Management chapter) and the firewall is enabled: • The firewall blocks remote management from the WAN unless you configure a firewall rule to allow it. • The firewall allows remote management from the LAN. 24.2 Access Methods The web configurator is, by far, the most comprehensive firewall configuration tool your ZyXEL Device has to offer. For this reason, it is recommended that you configure your firewall using the web configurator, see the following chapters for instructions. SMT screens allow you to activate the firewall and view firewall logs. 24.3 Enabling the Firewall From the main menu enter 21 to go to Menu 21 - Filter and Firewall Setup to display the screen shown next. Enter option 2 in this menu to bring up the following screen. Press [SPACE BAR] and then [ENTER] to select Yes in the Active field to activate the firewall. The firewall must be active to protect against Denial of Service (DoS) attacks. Additional rules may be configured using the web configurator. Chapter 24 Enabling the Firewall 230