ZyXEL UAG715 User Guide - Page 150
Configuring the System Default Trunk
View all ZyXEL UAG715 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Chapter 9 Trunks Table 58 Configuration > Network > Interface > Trunk > Add (or Edit) (continued) LABEL DESCRIPTION Egress Bandwidth This field displays with the least load first or spillover load balancing algorithm. It displays the maximum number of kilobits of data the UAG is to send out through the interface per second. Total Bandwidth Note: You can configure the bandwidth of an interface in the corresponding interface edit screen. This field displays with the spillover load balancing algorithm. It displays the maximum number of kilobits of data the UAG is to send out and allow to come in through the interface per second. Spillover You can configure the bandwidth of an interface in the corresponding interface edit screen. This field displays with the spillover load balancing algorithm. Specify the maximum bandwidth of traffic in kilobits per second (1~1048576) to send out through the interface before using another interface. When this spillover bandwidth limit is exceeded, the UAG sends new session traffic through the next interface. The traffic of existing sessions still goes through the interface on which they started. OK Cancel The UAG uses the group member interfaces in the order that they are listed. Click OK to save your changes back to the UAG. Click Cancel to exit this screen without saving. 9.2.2 Configuring the System Default Trunk In the Configuration > Network > Interface > Trunk screen and the System Default section, select the default trunk entry and click Edit to open the following screen. Use this screen to change the load balancing algorithm and view the bandwidth allocations for each member interface. Note: The available bandwidth is allocated to each member interface equally and is not allowed to be changed for the default trunk. Figure 98 Configuration > Network > Interface > Trunk > Edit (System Default) 150 UAG715 User's Guide