ZyXEL UAG715 User Guide - Page 78

Chapter 6 Monitor Table 21 Monitor > System Status > Interface Status (continued) LABEL DESCRIPTION TxPkts This field displays the number of packets transmitted from the UAG on the interface since it was last connected. RxPkts This field displays the number of packets received by the UAG on the interface since it was last connected. Tx B/s This field displays the transmission speed, in bytes per second, on the interface in the onesecond interval before the screen updated. Rx B/s This field displays the reception speed, in bytes per second, on the interface in the onesecond interval before the screen updated. 6.4 The Traffic Statistics Screen Click Monitor > System Status > Traffic Statistics to display the Traffic Statistics screen. This screen provides basic information about the following for example: • Most-visited Web sites and the number of times each one was visited. This count may not be accurate in some cases because the UAG counts HTTP GET packets. Please see Table 22 on page 79 for more information. • Most-used protocols or service ports and the amount of traffic on each one • LAN IP with heaviest traffic and how much traffic has been sent to and from each one You use the Traffic Statistics screen to tell the UAG when to start and when to stop collecting information for these reports. You cannot schedule data collection; you have to start and stop it manually in the Traffic Statistics screen. Figure 60 Monitor > System Status > Traffic Statistics 78 UAG715 User's Guide