ZyXEL UAG715 User Guide - Page 287

Figure 189 VPN > SSL VPN > Access Privilege Chapter 23 SSL VPN The following table describes the labels in this screen. Table 109 VPN > SSL VPN > Access Privilege LABEL Add Edit Remove Activate Inactivate Move Object Reference # Status Name User/Group DESCRIPTION Click this to create a new entry. Select an entry and click Add to create a new entry after the selected entry. Double-click an entry or select it and click Edit to open a screen where you can modify the entry's settings. To remove an entry, select it and click Remove. The UAG confirms you want to remove it before doing so. To turn on an entry, select it and click Activate. To turn off an entry, select it and click Inactivate. To move an entry to a different number in the list, click the Move icon. In the field that appears, specify the number to which you want to move the interface. Select an entry and click Object Reference to open a screen that shows which settings use the entry. See Section 8.3.2 on page 115 for an example. This field displays the index number of the entry. This icon is lit when the entry is active and dimmed when the entry is inactive. This field displays the descriptive name of the SSL access policy for identification purposes. This field displays the user account or user group name(s) associated to an SSL access policy. Access Policy Summary Apply Reset This field displays up to three names. This field displays details about the SSL application object this policy uses including its name, type, and address. Click Apply to save the settings. Click Reset to discard all changes. 23.2.1 The SSL Access Policy Add/Edit Screen To create a new or edit an existing SSL access policy, click the Add or Edit icon in the Access Privilege screen. UAG715 User's Guide 287