ZyXEL UAG715 User Guide - Page 172
OSPF Area Add/Edit Screen
View all ZyXEL UAG715 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
Chapter 11 Routing Protocols Table 68 Configuration > Network > Routing Protocol > OSPF (continued) LABEL DESCRIPTION Metric Type the external cost for routes provided by static routes. The metric represents the "cost" of transmission for routing purposes. The way this is used depends on the Type field. This value is usually the average cost in the OSPF AS, and it can be between 1 and 16777214. Area This section displays information about OSPF areas in the UAG. Add Click this to create a new OSPF area. Edit Double-click an entry or select it and click Edit to open a screen where you can modify the entry's settings. Remove To remove an entry, select it and click Remove. The UAG confirms you want to remove it before doing so. Object References Select an entry and click Object Reference to open a screen that shows which settings use the entry. See Section 8.3.2 on page 115 for an example. # This field is a sequential value, and it is not associated with a specific area. Area This field displays the 32-bit ID for each area in IP address format. Type This field displays the type of area. This type is different from the Type field above. Authentication This field displays the default authentication method in the area. Apply Click this button to save your changes to the UAG. Reset Click this button to return the screen to its last-saved settings. 11.3.2 OSPF Area Add/Edit Screen The OSPF Area Add/Edit screen allows you to create a new area or edit an existing one. To access this screen, go to the OSPF summary screen (see Section 11.3 on page 167), and click either the Add icon or an Edit icon. Figure 110 Configuration > Network > Routing > OSPF > Add 172 UAG715 User's Guide