ZyXEL UAG715 User Guide - Page 444

Chapter 39 System Table 181 Configuration > System > WWW > Service Control (continued) LABEL Edit Remove Move # DESCRIPTION Double-click an entry or select it and click Edit to be able to modify the entry's settings. To remove an entry, select it and click Remove. The UAG confirms you want to remove it before doing so. Note that subsequent entries move up by one when you take this action. To change an entry's position in the numbered list, select the method and click Move to display a field to type a number for where you want to put it and press [ENTER] to move the rule to the number that you typed. This is the index number of the service control rule. Zone Address Action Authentication Client Authentication Method Apply Reset The entry with a hyphen (-) instead of a number is the UAG's (non-configurable) default policy. The UAG applies this to traffic that does not match any other configured rule. It is not an editable rule. To apply other behavior, configure a rule that traffic will match so the UAG will not have to use the default policy. This is the zone on the UAG the user is allowed or denied to access. This is the object name of the IP address(es) with which the computer is allowed or denied to access. This displays whether the computer with the IP address specified above can access the UAG zone(s) configured in the Zone field (Accept) or not (Deny). Select a method the HTTPS or HTTP server uses to authenticate a client. You must have configured the authentication methods in the Auth. method screen. Click Apply to save your changes back to the UAG. Click Reset to return the screen to its last-saved settings. 39.7.5 Service Control Rules Click Add or Edit in the Service Control table in a WWW, SSH, Telnet, FTP or SNMP screen to add a service control rule. Figure 293 Configuration > System > Service Control Rule > Edit 444 UAG715 User's Guide