ZyXEL UAG715 User Guide - Page 472
Table 191, Label, Description
View all ZyXEL UAG715 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 472 highlights
Chapter 40 Log and Report The following table describes the labels in this screen. Table 191 Configuration > Log & Report > Log Setting > Edit (System Log) LABEL E-Mail Server 1/2 Active Mail Server Mail Subject Send From Send Log To Send Alerts To Sending Log Day for Sending Log Time for Sending Log SMTP Authentication User Name Password Active Log and Alert System Log DESCRIPTION Select this to send log messages and alerts according to the information in this section. You specify what kinds of log messages are included in log information and what kinds of log messages are included in alerts in the Active Log and Alert section. Type the name or IP address of the outgoing SMTP server. Type the subject line for the outgoing e-mail. Type the e-mail address from which the outgoing e-mail is delivered. This address is used in replies. Type the e-mail address to which the outgoing e-mail is delivered. Type the e-mail address to which alerts are delivered. Select how often log information is e-mailed. Choices are: When Full, Hourly and When Full, Daily and When Full, and Weekly and When Full. This field is available if the log is e-mailed weekly. Select the day of the week the log is e-mailed. This field is available if the log is e-mailed weekly or daily. Select the time of day (hours and minutes) when the log is e-mailed. Use 24-hour notation. Select this check box if it is necessary to provide a user name and password to the SMTP server. This box is effective when you select the SMTP Authentication check box. Type the user name to provide to the SMTP server when the log is e-mailed. This box is effective when you select the SMTP Authentication check box. Type the password to provide to the SMTP server when the log is e-mailed. Use the System Log drop-down list to change the log settings for all of the log categories. disable all logs (red X) - do not log any information for any category for the system log or e-mail any logs to e-mail server 1 or 2. enable normal logs (green check mark) - create log messages and alerts for all categories for the system log. If e-mail server 1 or 2 also has normal logs enabled, the UAG will e-mail logs to them. E-mail Server 1 enable normal logs and debug logs (yellow check mark) - create log messages, alerts, and debugging information for all categories. The UAG does not e-mail debugging information, even if this setting is selected. Use the E-Mail Server 1 drop-down list to change the settings for e-mailing logs to e-mail server 1 for all log categories. Using the System Log drop-down list to disable all logs overrides your e-mail server 1 settings. enable normal logs (green check mark) - e-mail log messages for all categories to e-mail server 1. enable alert logs (red exclamation point) - e-mail alerts for all categories to e-mail server 1. 472 UAG715 User's Guide